Re: [Pioneer-users] Error No bootable device available

[Reed Hedges <reed@xxxxxxxxxxxxxxxx>]

Hi Hamilton,

Have you checked to make sure the disk is still connected to the computer and 
power supply, and that it runs when the computer is on?  You can also connect it 
to IDE1 and change Drive C to IDE1, or take the disk out and connect it to 
another computer (you may need an adapter for the 2.5" drive's IDE cable to 
connect it to a full sized desktop computer).

You can also contact support to see if they have any additional advice: 
http://robots.mobilerobots.com/techsupport

Reed


hamilton rivera wrote:
> Hi,
> 
> I use a P3AT for 1 year, but after the last week 
> I have a problem when the robot try to boot 
> a message appears: "No bootable device available".  
> 
> I look the BIOS settings.  The Drive C is set to be IDE0 
> and is first in the boot order.  Also the drive for IDE0 
> is set to option 3, Autoconfig.  But the disk be not able 
> to boot.
> 
> what can I do to restore the robot's system?
> 
> 
> Hamilton
> 
> ------------------------------------------------------------------------
> 
> Yahoo! Deportes Beta
> ¡No te pierdas lo último sobre el torneo clausura 2008!
> Entérate aquí http://deportes.yahoo.com