Pioneer-Users
Date Index Thread Index

Re: [Pioneer-users] Error No bootable device available

Hello
The BIOS settings are correct. Then I check the physical connections.  Disconnect and reconnect the connections to the drive and to the motherboard, and power connection, and change the connectors, but this does not help.
 
The serial number of the robot is GI__2633 , Thanks you in advance
 
Hamilton


Zeb Dahl <zeb@mobilerobots.com> escribió:
Hello Hamilton,
What is the serial number of the robot?

If the BIOS settings are correct, then next thing I would do is to
check the physical connections. Disconnect and reconnect the
connections to the drive and to the motherboard (be careful to avoid
static discharge) and hte hard drive power connection and see if it
helps.
Let me know what happens and I can help further if this does not help.

Best,
-Zeb Dahl

On Sat, 2008-04-26 at 13:49 -0500, hamilton rivera wrote:
> Hi,
> I use a P3AT for 1 year, but after the last week
> I have a problem when the robot try to boot
> a message appears: "No bootable device available".
> I look the BIOS settings. The Drive C is set to be IDE0
> and is first in the boot order. Also the drive for IDE0
> is set to option 3, Autoconfig. But the disk be not able
> to boot.
> what can I do to restore the robot's system?
>
>
> Hamilton
>
>
> ______________________________________________________________________
>
> Yahoo! Deportes Beta
> ¡No te pierdas lo último sobre el torneo clausura 2008!
> Entérate aquí http://deportes.yahoo.com



Yahoo! Deportes Beta
¡No te pierdas lo último sobre el torneo clausura 2008!
Entérate aquí http://deportes.yahoo.com